Resetting The Number Of The Measured Value; Activating The Id Number - wtw PhotoLab S12-A Operating Instructions Manual

6. Documentation

6.1 Resetting the number of the measured value

6.2 Activating the ID number

If the I. D. number function is active, a sequence of up
to 6 alphanumeric characters (I. D. number) is allocated
to a measurement (e. g. sample location, customer
number, river kilometer).
– Call up the no. of meas. value submenu.
l
yes
The numbering of the measured values starts again
with 001 (default)
l
no
Consecutive numbering of the measured values
(from 001 to 999)
– Select the menu item with
1
– Confirm with .
– Call up the I. D. number submenu.
l
off
It is not possible to enter an ID number (default).
l
on
Input an ID number for each measured value.
– Select the menu item, on, with
1
– Confirm with .
3 28
or
3
17