Error Messages - wtw photolab S12 Operating Instructions Manual

14. Updating method data
During the download, the following display appears on
the photometer screen:
You can check whether the new method data are
stored in the photometer.
To do so, proceed as follows:

Error messages

Message
No meter found
64
– After the download, confirm the "Data successfully
downloaded" message. The download is finished.
The photometer returns to the concentration
measuring mode.
– In the setup menu, call up the meter setup
submenu.
– Call up the system info menu item.
Sample display (the software version is irrelevant
here).
The method version (here: 19.00) has to agree with the
method version for your photometer in the "Update
Method Data" window during the download.
Meaning
Connection PC - photo-
meter out of order or not
available
Photometer not recognized – Select the photometer manually
Remedy
– Tightly connect the cable to the
serial interfaces of the PC and
photometer.
– Use the correct cable