Safety; Authorized Use; General Instructions; Labeling Of Notes - wtw photolab S12 Operating Instructions Manual

2. Safety

This operating manual contains basic instructions to
be followed in the commissioning, operation and main-
tenance of the meter. Consequently, all responsible
personnel must read this operating manual before

2.1 Authorized use

The photometer is authorized exclusively for
analyzing substances in water and aqueous solutions
using round cells or rectangular cells (special optical
glass).

2.2 General instructions

The photometer is constructed and tested according
to the EN 61010-1 safety regulations for electronic
measuring instruments. It left the factory in a safe and
secure technical condition.
The smooth functioning and operational safety of the
photometer can only be guaranteed under the climatic
conditions specified in chapter 17 T
this operating manual.
Opening the photometer or adjustment, maintenance
and repair work must only be performed by personnel
authorized by the manufacturer.
The only exceptions to this are the activities described
in chapter 16 M
AINTENANCE

2.2.1 Labeling of notes

indicates notes that you must read – for
your own safety, the safety of others and to
protect your meter from being damaged.
2.2.2 Dangers of disregarding the safety instructions
Disregarding the safety instructions can adversely
affect the safety of both the user and the environment
as well as the equipment.

2.2.3 Qualification of the personnel

The personnel responsible for the commissioning,
operation and maintenance must have the necessary
qualifications for this work. If the personnel do not
have the required skills they have to be instructed.

2.2.4 Technical state of the meter

It is the responsibility of the operator to continuously
observe the overall technical condition (externally
recognizable deficits and damage as well as alter-
ations to the operational behavior) of the meter.
If safe operation is no longer possible, the equipment
must be taken out of service and secured against
inadvertent operation.
8
D
ECHNICAL ATA
, , . Non-
CLEANING DISPOSAL
working with the meter.
The operating manual must always be available in the
vicinity of the meter.
Observe the technical specifications of the cells
according to chapter 17 T
Any other use is considered unauthorized.
compliance results in the loss of warranty claims.
Follow the points listed below when operating the
photometer:
Follow local safety and accident prevention regula-
tions.
Observe the enclosed instructions concerning
of
reagents and accessories.
Observe the regulations when dealing with
dangerous substances.
Follow the operating instructions at the workplace.
Use only original spare parts.
indicates notes that draw your attention to
special features.
Non-compliance with the safety instructions will result
in the loss of any warranty claims.
Furthermore, it must be ensured that the personnel
read and completely understand the present operating
manual.
Safe operation is no longer possible if
the equipment has been damaged in transport
the equipment has been stored under adverse
conditions for a lengthy period of time
the equipment is visibly damaged
the equipment no longer operates as prescribed.
If you are in any doubt, please contact the supplier of
the photometer.
D .
ECHNICAL ATA