Resetting The Number Of The Measured Value; Download Memory - wtw PhotoLab S6 Operating Instructions Manual

6. Documentation

6.1 Resetting the number of the measured value

6.2 Download memory

The measured value storage can be selectively down-
loaded to either the display or serial interface.
The selection of the output medium is made after the
specification of the sorting criteria.
– Call up the no. of meas. value submenu.
l
yes
The numbering of the measured values starts again
with 001 (default)
l
no
Consecutive numbering of the measured values
(from 001 to 999)
– Select the menu item with
1
– Confirm with .
– Call up the download memory submenu.
The download memory menu item only appears
after at least one measurement has been
performed.
The following sorting criteria can be set:
l
total – all stored measured values
l
from date – all measured values from a special date
– Select the menu item with
1
– Confirm with .
3
3
13