Meter Setup; Selecting The Language - wtw photolab S12 Operating Instructions Manual

13. Meter Setup

– To switch on the photometer, open the cover.
1
– Press
– In the setup menu, call up the meter setup submenu.
The following display appears:

13.1 Selecting the language

The following languages are stored in the photometer:
Deutsch (German)
English
Français (French)
Italiano (Italian)
Português (Portuguese)
Polski (Polish)
Dansk (Danish)
Svenska (Swedish)
Español (Spanish)
Nederlands (Dutch)
Indonesia (Indonesian)
Ceština (Czech)
Magyar (Hungarian)
Russkij (Russian)
Türkçe (Turkish)
Brasil (Brasilian)
60
This chapter describes four functions of the meter
setup menu:
select language
set date/time
Performing a meter reset
system info
This is the order in which the available
languages appear in the select language menu.
The available languages are listed in the
language of the respective country in the
photometer.
When Russkij is selected as the language, the
Cyrillic alphabet is used for the user guidance.
Method designation and ID numbers are
always displayed in Latin script.
For output to the RS 232 C interface, Cyrillic
characters are converted to Latin characters
according to GOST.
– Call up the select language menu item.
– Select a language, e.g. English
1
– Confirm with
1
– Press the key again:
Return to the meter setup submenu.
The displays appear in English.