Table of Contents
Advertisement
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard F71879 Super
I/O chip.
Restore AC Power Loss
Off
When power returns after an AC power failure, the system's power is off. You must
press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system's power is off when AC
power failure occurs, it will remain off when power returns. If the system's power is
on when AC power failure occurs, the system will power-on when power returns.
Watchdog Timer
Enable or disable Super I/O watchdog timer.
Chapter 7 BIOS Setup
Chapter 7
Serial Port 1 & Serial Port 2 Configuration
Serial Port
Enable or disable the serial port.
Change Settings
Select the IO/IRQ setting of the I/O device.
73
www.dfi.com
Advertisement
Table of Contents
