Table of Contents
Advertisement
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend button is
pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system.
Resume by Ring
Enable this field to use the Ring signal to wake up the system.
Resume by USB
Enable this field to use a USB device to wake up the system.
Resume by PS2 KB/MS (S1, S3)
Enable this field to use the PS/2 KB/MS to wake up the system.
Wake system with Fixed Time
Enable or disable the system wake on alarm event. When enabled, system will wake
on the hr::min::sec specified.
Chapter 7 BIOS Setup
Chapter 7
PC Health Status
This section displays the SIO hardware health monitor.
Smart Fan Function
48
www.dfi.com
Advertisement
Table of Contents
