North Bridge Configuration
This section is used to configure the parameters of North Bridge.
Primary Display
Auto When the system boots, it will auto detects the display device.
IGFX When the system boots, it will first initialize the onboard VGA.
PEG When the system boots, it will first initialize the PCI Express x16 graphics
card.
PCI When the system boots, it will first initialize the PCI graphic
VT-d
Check to enable VT-d function on MCH.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device.
Chapter 7 BIOS Setup
Chapter 7
PCI Express Configuration
This field is used to configure the PCI Express settings of the North Bridge.
PEG
Speed
Selects the speed of the PEG.
Enable PEG
Enable or disable the PEG.
60
www.dfi.com