Table of Contents
Advertisement
When IDE mode is selected in the SATA Mode Selection, it will display the following
information:
Chapter 7 BIOS Setup
Chapter 7
When AHCI or RAID mode is selected in the SATA Mode Selection, it will display the following
information:
SATA Controllers(s)
Enable or Disable SATA controllers.
SATA Controller Speed
Indicates the maximum speed that the SATA controller can support.
Agressive LPM Support
Enable PCH to aggressively enter link power state.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or disable the storage
features.
Alternate ID
Report alternate Device ID.
Port 0, Port 1 and Port 4
Enables or disables the SATA port.
Hot Plug
Designates the SATA port as hot pluggable.
51
www.dfi.com
Advertisement
Table of Contents
