Table of Contents
Advertisement
SATA Configuration
This section is used to configure SATA functions.
SATA Controller(s)
This field is used to enable or disable the Serial ATA channels.
SATA Mode Selection
IDE Mode
This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host
Controller Interface).
RAID Mode
This option allows you to create RAID or Intel Matrix Storage configuration
on Serial ATA devices.
Chapter 7 BIOS Setup
Chapter 7
If AHCI or RAID is selected in the SATA Mode Selection, it will display the
following information:
SATA Controller(s)
This field is used to enable or disable the Serial ATA channels.
SATA Controller Speed
Indicates the maximum speed that the SATA controller can support.
Agressive LPM Support
Enable PCH to aggressively enter link power state.
Serial ATA Port 0 to Serial ATA Port 5
These fields are used to configure the connected SATA devices.
Hot Plug
Designates the SATA port as hot pluggable.
70
www.dfi.com
Advertisement
Table of Contents
