DFI WM343-MB User Manual page 16

Installing a PCI or PCIe Expansion Card
1. To install the expansion card, you need to remove the mounting bracket and the mounting
screw that secure the bracket to the chassis. Put the screw and the brackets in a safe place
for later use.
Mounting screw
Mounting bracket
Chapter 3 Installing Devices
Chapter 3
2. Insert the Expansion card into the PCI or PCIe slot. Replace the screw you removed in step 1
to secure the bracket in place.
Note:
The Expansion card used in the above illustrations may not resemble the actual cards.
These illustrations are for reference only.
16
Mounting screws
www.dfi.com