Table of Contents
Advertisement
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
Chapter 7 BIOS Setup
Chapter 7
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS)Enables the Power On Suspend function.
S3(STR)Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system.
Resume by Ring
Set this field to Enabled to use the modem ring-on function. This will allow
your system to power-on to respond to calls coming through an external or
internal modem.
Resume by USB
About resume by USB; Options are enabled or disabled.
Resume by PS2 KB (S1, S3)
About resume by PS2 keyboard (S1, S3); Options are enabled or disabled.
Resume by PS2 MS (S1, S3)
About resume by PS2 mouse (S1, S3); Options are enabled or disabled.
Wake system with Fixed Time
Enable or disable the system wake on alarm event. When enabled, system
will wake on the hr::min::sec specified.
67
www.dfi.com
Advertisement
Table of Contents
