Table of Contents
Advertisement
Trusted Computing
This section configures settings relevant to Trusted Computing innovations.
TPM Support
Enables or Disables TPM. Resetting the platform is required for the O.S. to show TPM.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU
information.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater than
3. The default is Disabled because this problem does not exist in the Win-
dows series operating systems. If you are using an operating system other
than Windows, this problem may occur. To avoid this problem, enable this
field to limit the return value to 3 or less than 3.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
EIST
Enable or disable Intel Speedstep.
Turbo Mode
If you want the system to run at a faster speed, set this field to Enabled.
However, compatibility problems may occur with some DRAMs if the system
is running in Turbo mode. If you encounter this problem, set this field to
Disabled.
69
www.dfi.com
Advertisement
Table of Contents
