Table 38 Environmental Standards Compliance - Alcatel-Lucent 7705 SAR-A Installation Manual

3.
Standard Title
IEEE 1613:2009 + Environmental and Testing Requirements for
A1:2011 Communications Networking Devices
IEC 61850-3 Communication networks and systems for
power utility automation - Part 3: General
requirements
IEC 60068-2-1 Environmental testing – Part 2-1: Tests –
Test A: Cold
IEC 60068-2-2 Environmental testing - Part 2-2: Tests - Test
B: Dry heat
IEC 60068-2-30 Environmental testing - Part 2: Tests. Test
Db and guidance: Damp heat, cyclic (12 +
12-hour cycle)
IEC 60255-21-2 Electrical relays - Part 21: Vibration, shock,
bump and seismic tests on measuring relays
and protection equipment - Section Two:
Shock and bump tests
ETSI 300 753 Class 3.2 Acoustic noise emitted by
telecommunications equipment
Telcordia GR-63-CORE NEBS Requirements: Physical Protection
ETSI EN 300 019-2-1 Specification of environmental tests; Storage
v2.1.2, Class 1.2
ETSI EN 300 019-2-2 Specification of environmental tests;
V2.1.2, class 2.3 Transportation
ETSI EN 300 019-2-3 Specification of environmental tests;
V2.2.2, class 3.2 Stationary use at weatherprotected locations
ETSI EN 300 019-2-4 Specification of environmental tests;
v2.2.2 class T4.1 Stationary use at non-weatherprotected
locations
Telcordia GR-3108- Generic Requirements for Network
CORE Equipment in the Outside Plant (OSP)
7705 SAR-A Chassis Installation Guide
Class B
Table 38: Environmental Standards Compliance
Standards and Protocol Support
Platform
✓ 1 ✓ 1
✓ 2 ✓ 2
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ 3 ✓ 3 ✓ 3 ✓ 3
✓ ✓
✓ 1
✓ 2 ✓ 2 ✓ 2
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓
✓
✓ 3 ✓ 3 ✓ 4
✓
✓
✓
✓
✓
✓
✓
✓
✓ 4
137