Establishing Router Management Connections
Running Telnet
After the Ethernet management port IP address is configured, the 7705 SAR-A CLI can be
accessed with a Telnet connection. To establish a Telnet connection, run a Telnet program
and issue the telnet command, followed by the management port IP address.
The following displays an example of a Telnet login:
C:\>telnet 192.168.1.xx1
Login: admin
Password: ########
ALU-1#
The default login is admin.
The default password is admin.
For more information about Telnet, refer to the 7705 SAR OS System Management Guide
and the 7705 SAR OS Basic System Configuration Guide. For pinout information, refer to
Management Port
116
Pinouts.
7705 SAR-A Chassis Installation Guide