7705 Sar-A Ports; Management Port; Figure 29 7705 Sar-A Port Connectors (Variant With T1/E1 Ports); Figure 30 Management Port Pin Numbers - Alcatel-Lucent 7705 SAR-A Installation Manual

7705 SAR-A Ports

7705 SAR-A Ports
Figure 29
variant shown has T1/E1 ports.
Figure 29: 7705 SAR-A Port Connectors (Variant with T1/E1 Ports)
Status
LED
Lnk Act Lnk
Status
1A
(4) Gigabit
Ethernet

Management Port

The Mgmt (management) port supports half-duplex and full-duplex communication via
10/100 or autonegotiated Ethernet. The Mgmt port provides a channel to download software
and configuration files and to manage the system. This port has an RJ-45 connector on the
front panel. You must provide a shielded CAT5e Ethernet cable to connect to the port.
Shielded cable must be used to maintain EMC compliance.
Figure 30
124
identifies the port connectors that are accessible on the 7705 SAR-A. The chassis
Act Lnk Act Lnk Act
2A 3A 4A 1B 2B 3B 4B 5
Ethernet
(4) Gigabit
Ethernet
RJ-45s SFPs
shows the Management port pin numbers.
7705 SAR-A
Lnk Act Lnk Act Lnk Act Lnk Act
6 7 8 9 10 11 12
(4) Gigabit (4) FE
Ethernet RJ45s
SFPs
Figure 30: Management Port Pin Numbers
Pin 8
7705 SAR-A Chassis Installation Guide
Synchronization
In
Mgmt
1 3 5 7
Stat Stat Stat Stat
Lnk Act
Console
In
Stat Stat Stat Stat Sync ToD Out
2 4 6 8
T1/E1
(8) T1/E1
RJ-45s
Console ToD
port Out port
Pin 1
Management
port
-48 VDC
Terminal
block
23321
19593