Nrtl; Nrtl Approval For External Dc Supplies; Food And Drug Administration - Alcatel-Lucent 7705 SAR-A Installation Manual

NRTL

This equipment is certified by the NRTL as meeting the requirements of UL 60950-1, Safety
of Information Technology Equipment.

NRTL Approval for External DC Supplies

When the system is equipped with an AC rectifier, the rectifier must have NRTL-accredited
approval. In addition, low-voltage DC outputs must meet UL 60950-1 SELV requirements.
High-voltage DC sources must meet UL 60950-1 hazardous voltage secondary source
requirements.

Food and Drug Administration

This product complies with 21 CFR 1040.10 and 1040.11 regulations, which govern the safe
use of lasers. Only qualified service personnel, thoroughly familiar with laser radiation
hazards, should install or remove the fiber-optic cables used in this system. You can find
information about the safe use of lasers in ANSI Z 136.1: Safe Use of Lasers and ANSI Z
136.2: Safe Use of Lasers in Optical Fiber Communications Systems. You can obtain these
documents and other instructional material from:
7705 SAR-A Chassis Installation Guide
Laser Institute of America
13501 Ingenuity Drive, Suite 128
Orlando, FL 32826
http://www.laserinstitute.org
Mandatory Regulations
27