United States Regulations; Federal Communications Commission - Alcatel-Lucent 7705 SAR-A Installation Manual

United States Regulations

United States Regulations
This section describes the mandatory regulations that govern the installation and operation of
the 7705 SAR-A in the United States.

Federal Communications Commission

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Part 68
The T1 network interface on the 7705 SAR-A meets the FCC specifications.
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
ACTA.
The product identification number indicating compliance for the 7705 SAR-A is:
GQ6DENAN7705SAR-A.
In the event that repairs to this equipment are needed, contact Technical Support.
26
Note: Changes or modifications not expressly approved by Alcatel-Lucent could void the
user's authority, granted by Alcatel-Lucent's certification by the FCC, to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct
the interference at the user's expense.
7705 SAR-A Chassis Installation Guide