Sfps; Table 25 Sfp Installation Components; Figure 22 Installing An Sfp - Alcatel-Lucent 7705 SAR-A Installation Manual

SFPs

A small form-factor pluggable (SFP) device can be installed in Ethernet ports 1B to 4B and
ports 5 to 8.
components.
Lnk Act Lnk
Status
1A
7705 SAR-A Chassis Installation Guide
Note:
• Discard SFPs according to all local laws and regulations.
• SFPs can be installed and replaced without disabling the Ethernet interfaces.
• SFPs are keyed to prevent incorrect insertion. If an SFP is not seated properly, remove
it and confirm that the orientation is correct before reinserting it.
Figure 22 illustrates the installation of an SFP.
Figure 22: Installing an SFP
Act Lnk Act Lnk Act
2A 3A 4A 1B 2B 3B 4B 5
Ethernet
1 B
Key Description
1 SFP receptacle
2 SFP
7705 SAR-A
Lnk Act Lnk Act Lnk Act Lnk Act
6 7 8 9 10 11 12
2 B
3 B
4 B
Table 25: SFP Installation Components
Table 25 describes the
Mgmt
1 3 5 7
Stat Stat Stat Stat
Lnk Act
Console
In
Stat Stat Stat Stat Sync ToD Out
2 4 6 8
T1/E1
1
1
2
SFPs
-48 VDC
23313
97