7705 Sar-A Power Consumption; Table 5 Chassis Power Consumption - Alcatel-Lucent 7705 SAR-A Installation Manual

System Specifications
Notes:
1.
2.

7705 SAR-A Power Consumption

Note:
1.
Table 6
and XFP modules. Not all types are applicable to all chassis, adapter cards, and modules.
Contact your Alcatel-Lucent representative for information on SFP, SFP+, and XFP module
availability and applicability.
50
Table 4: 7705 SAR-A Environmental Specifications (Continued)
Parameter
Earthquake
1
Pollution degree
Rated voltage (DC)
Operating voltage range (DC)
Rated voltage (AC)
Operating voltage range (AC)
Acoustic noise level
Pollution degree is as defined in IEC 60950. Pollution Degree 2 applies where there is only non-conductive
pollution that might temporarily become conductive due to occasional condensation.
The AC operating voltage range applies only to the external AC power supply.
1
Description
7705 SAR-A chassis with Ethernet and T1/E1
7705 SAR-A chassis with Ethernet only
Power consumption values include the power consumption of the pluggable optics (see
lists the maximum power consumption for the Alcatel-Lucent approved SFP, SFP+,
Description
Suitable for high-risk areas (Zone 4/California, for
short-duration disturbance)
2
–48/–60 VDC
(–60 VDC is for various European countries)
–40 to –75 VDC
120/240 VAC
2 90 to 264 VAC
7705 SAR-A is silent
Table 5: Chassis Power Consumption
7705 SAR-A Chassis Installation Guide
Typical Power Maximum Power
(W) (W)
45 W 52 W
43 W 50 W
Table 6).