Table of Contents
Advertisement
Establishing Terminal-PC Connection
Configure MT180 system settings after connecting power through an external power source. MT180
enables users to link to a host computer via Ethernet or RS485 interfaces for data communication.
MT180 can setup through MTTool or JanitorLite.
Ethernet
Port
Unitech MTTool is a development program designed to help technical engineers customize access con-
trol, attendance control and manage function modules in a specified terminal (i.e. MT180). Connect
MTTool to MT180 through the following:
1.
Connect MT180 and a computer to the network.
2.
MT180's default IP address is 192.168.2.127. Set the computer on the same subnet with
MT180.
For example, IP Address 192.168.2.100; Network Mask 255.255.255.0.
3.
Make sure the TCP port 10002 is not occupied. If yJanitorLite is installed, stop the Unitech MT
Service in the Control Panel.
4.
Disable any firewalls and execute MTTool.
5.
In MTTool, on the computer screen, under the SysSet1 tab, select WinSocket. In the IP/Name
field, input MT180's default IP address 192.168.2.127 and in the Port field, input the default
port 10002.
6.
Click Connect. The status bar at the bottom of MTTool displays Connection succeed , which
means MTTool has successfully cononected to MT180.
Chapter 1
Getting Started
RS485
Port
3
Advertisement
Table of Contents
