Table of Contents
Advertisement
5.
To enroll the first fingerprint for this card, input 0000 in the Index field and click Enroll Finger
(1). Input 000000000000 in the Fingerprint Index field and click Add a Card No (2).
2
Utilize JanitorLite to collect fingerprints through the following:
1.
Connect MT180 to a computer network. See Establishing Terminal-PC Connection on page 3.
2.
Enable Unitech MT Service in the Control Panel.
3.
On the computer screen, click start
4.
Click System
SysParams Setting. The SetParams window appears.
Specify the IP address and port number of the fingerprint reader. Click OK.
Chapter 2
1
All Programs
Using the Hardware
JanitorLite
JanitorLite.
9
Advertisement
Table of Contents
