24. Under the Permit Setting tab, check Anti-back. Click Apply
command to the controller. A window appears with the message Setting Successfully.
25. Under the Entrance guard weekly plan tab, select a desired weekday from the drop down
menu.
26. Inside the PeriodID field, double-click +. The Selected periods window appears.
27. Click a desired time period (for example, PeriodID 127) to set for 24 hours of access in this
weekday, and click OK.
42
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Send to immediately send this