Table of Contents
Advertisement
3.
Execute JanitorLite on the computer.
4.
Click Controller(C)
5.
Right-click All Groups, and click Append
troller Group Management window appears.
6.
Enter the controller group name (for example, Demo). Click Apply
troller Group Management window.
7.
Right-click the desired group (Demo), and click Append
Controller Management window appears.
8.
In the ControllerName field, enter the controller name (for example, MT180).
9.
In the IPHost field, input the controller's IP address (192.168.110.230). Click Apply.
10. Click Reset to reset data in this controller. A window appears, asking to reset. Click Yes. MT180
screen displays messages Please wait! EraseFingerInfo., Please wait! Erase Log... and
Please wait! EraseCardInfo. MT180 returns to the standby status when complete.
NOTE:
Alternatively, reset data under the SysSet2 tab in MTTool. In the Delete all field, select
to delete all cards, logs, fingerprints, and click Delete. In the Shift Setting field, click
Clear All
11. Click OK to return to the Controller Group Management window.
12. Click User(U)
User Management.
Controller Management.
Group to add a new controller group. The Con-
Set.
Chapter 4
Advanced Setting
OK to return to the Con-
Entity to add a new controller. The
39
Advertisement
Table of Contents
