Table of Contents
Advertisement
4.
Click User
User Management.
Right-click All group. Select Append
Enter a group name (for example, DEMO). Click Apply
5.
Right-click DEMO. Select Append
Enter a user name (for example, DEMOUSER). In the CardNo. field, click + The Card setting
window appears.
NOTE:
Make sure the card type is compatible with the reader.
6.
Follow MT180's onscreen instructions to enter the Card Info Query. See General Settings on
page 12. Swipe the card over the Proximity Reader. MT180 beeps three times.
The screen displays Invalid Card with the card number.
7.
Input the card number in the Card No.
8.
Click Apply
OK to return to the User set-
ting window.
9.
Click Apply
OK.
NOTE:
The card will not immediately be to
MT180, but it will be sent periodi-
cally via Unitech MT Service. The
default value is five minutes. It is
optional to modify the interval setting
in the MT Service Tool.
Chapter 2
Group. The UserGroup Setting window appears.
OK.
Entity. The User setting window appears.
Using the Hardware
7
Advertisement
Table of Contents
