Table of Contents
Advertisement
12. In the APB Setting box, select Enable.
13. Click Set Group Info.
Utilize JanitorLite to prohibit same card reentry and re-exit through the same door.
1.
Connect a secondary reader to MT180 via Drive RS232.
RS232 Drive
NOTE:
While MT180 serves as an internal reader, the secondary reader is the external reader.
Ensure the card type is compatible with the internal/external reader.
2.
Set MT180 and the computer on the same subnet network.
NOTE:
Switch the controller operation mode to be Access, and synchronize the date and time
in MTTool.
38
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Advertisement
Table of Contents
