Table of Contents
Advertisement
4.
Right-click All Groups, and click Append
troller Group Management window appears.
5.
Enter the controller group name (for example, DEMO). Click Apply, and then OK to return to
the Controller Group Management window.
6.
Right-click the desired group (for example, DEMO), and click Append
controller. The Controller Management screen appears.
7.
Enter the controller name (for example, No.1) in the ContorllerName field.
8.
Input MT180's IP address (for example, 192.168.110.230) in the IPHost field. Click Apply.
9.
Click Reset to reset data in this controller. A window appears, asking to reset. Click Yes. MT180
screen displays messages Please wait! EraseFingerInfo., Please wait! Erase Log... and
Please wait! EraseCardInfo. MT180 returns to the standby screen when the reset process is
complete.
NOTE:
Alternatively, reset data under the SysSet2 tab in MTTool. In the Delete all field, select
to delete all cards, logs, fingerprints, and click Delete. In the Shift Setting field, click
Clear All and then Set.
10. Click OK to return to the Controller Group Management window.
11. Click User(U)
User Management.
12. Right-click All Groups, and click Append
Setting window appears.
Chapter 4
Group to add a new controller group. The Con-
Group to add a new user group. The User Group
Advanced Setting
Entity to add a new
21
Advertisement
Table of Contents
