Using Dect Phone (Optional) - Unitech Tashi User Manual

Using DECT Phone (Optional)

MT180 has an optional DECT module that can make intercom calls. The procedures for registering
MT180 to DECT base stations may vary between phone service providers. MT180 can register up to
four base stations.
Register MT180 to an AWTEK base station through the following:
NOTE:
Before registration, make sure the voice module is properly installed while MT180 pow-
ers on through the running module checking process.
1. Press and hold
tor on the front panel flashes.
2. Press F1 to enter the terminal menu.
3. Press F3 to select the Advanced option.
4. Press F5 to enter the Advanced option.
5. Enter the system login password (12345678, by default) and press F5 to confirm.
6. Enter the Voice Park option. The screen displays Voice Module Parking OK when registration
is completed.
Make an intercom call by using an AWTEK DECT phone through the following:
1. Press Talk/Doorbell. MT180 connects to the
DECT phone while the screen displays Con-
nect... Please wait!.
The LED indicator on the DECT phone
flashes and the phone rings with the
MT180's HS number (HS1, by default)
shown onscreen.
2. Press answer
beeps while the screen displays Calling...,
the duration of this call is shown on the
DECT phone screen.
3. Press on the DECT phone, to trigger the
door open.
NOTE:
Ensure the relay wiring is ready.
Cancel registration by using a registered handset.
Cancel MT180's registration on an AWTEK DECT phone handset through the following:
1. Press to enter the main menu.
2. Press or to select the BS setting option. Press
Waiting....
3. Follow the onscreen prompt to input the base station's Master PIN (0000, by default) and press
to confirm. A confirmation sound beeps, and the sub menu opens.
4. Press or to select the Remove HS option. Press
Remove HS1/2/3/4/5?.
5. Follow the onscreen prompt to input MT180's HS number (1/2/3/4/5, by default) or press
cancel.
1. Press to confirm. A confirmation sound beeps, and the screen displays Not sub when this
setting is done.
on the back panel of the base station for 15 - 20 seconds. The LED indica-
to receive the call. MT180
Chapter 2 Using the Hardware
to confirm. The screen displays
to confirm. The screen displays
Press the button
to
11