Table of Contents
Advertisement
17. Input the card number in the Card No. field. Click Apply, and then OK to return to the User set-
ting window.
NOTE:
See General Settings on page 12 to acquire the card number.
18. Click OK to return to the User Group Setting window.
19. Click Permit(P)
Permit Management.
20. Select the desired user group (for example, DEMO), and click Setting on the toolbar. The
Selected Controllers window appears.
21. Select the desired controllers (for example, No.1 DEMO), and click OK to return to the Janitor-
Lite - [Permit Management] window.
22. Click Attendance
Duty Management.
Chapter 4
Advanced Setting
23
Advertisement
Table of Contents
