Table of Contents
Advertisement
Enter the LongTimeDoor option. It is possible to enable/disable the open door function for a select
period of time. Follow the onscreen prompt to swipe the card before this setting is activated (Whether
Turn on or Turn off is selected) and the screen displays Auto-OpeningDoorTurn on/off.
Advanced Settings
Press F1 to enter the terminal menu.
Press F3 to select the Advanced option.
Press F5 to enter the Advanced option.
Using the numeric keypad to enter the default system login password
12345678, and press F5 to confirm. Ten options are available:
•
Set Device ID.
•
SetBaudrate.
•
SetLanguage.
•
SetBacklight.
•
SetNetwork.
•
VoicePark.
•
Reboot.
•
ResumeDefault.
•
Anti-thief.
•
Exit.
Enter the Set Device ID option. Specify the terminal ID (001, by default).
Enter the SetBaudrate option. Select a baud rate (115200 bps, by default) to match the computer.
Available rates are 9600, 19200, 38400 and 115200 bps. The larger number equates to a faster con-
nection speed.
Enter the SetLanguage option to switch the terminal language. Current supported languages are Eng-
lish, Simplified Chinese and Traditional Chinese.
Enter the SetBacklight option to set the backlight behavior. Select AlwaysTurnOn, to have the back-
light to stay on all the time. Select AlwaysTurnOff, to have the backlight turn off all the time. Select
TurnOnOnwork, to have the backlight turn on when a button is pressed.
Enter the SetNetwork option to configure the network settings.
Set Network
Set Net Password
Enter the network password.
Set IP Address
Enter the IP address (192.168.2.127, by default).
Set Net Mask
Enter the network mask (255.255.255.0, by default).
Set Gateway
Configure the network gateway.
Set Port Number
Specify a local port number (10002, by default). The maximum valid
port number is 65535.
Set Baud Rate
Select a serial port baud rate (115200 bps, by default). Available rates
are 9600, 19200, 38400, 57600 and 115200 bps. The larger number
equates to a faster connection speed.
Confirm Setting
Select Yes to confirm the network settings. The screen displays Modify
network success!.
Select No to go back to SetNetwork options.
Chapter 3
Description
Onscreen Setting
>OperationSel<
X General
>> Advanced
13
Advertisement
Table of Contents
