Using The Terminal Block; Terminal Block Pin Assignment - Unitech TASHI MT180 Quick Reference Manual

Using the Terminal Block

MT180 provides an 11-position Terminal Block for input/output signals.
1
Insert the wire's stripped end into the desired terminal block position. Tighten
the lock screw to secure the wire.
2
Insert the Terminal Block Plug into MT180's Terminal Block Port on the back
panel.

Terminal Block Pin Assignment

Pin Name
11. 12V
10. GND
9. GND
8. D+
7. D-
6. OPEN
5. SAFE
4. CHECK
3. NC
2. COM
1. NO
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
1....................11
Description
DC Out, support +12V, 2.0A.
Ground.
Ground.
RS485 Signal.
RS485 Signal.
Door Open Trigger.
Security.
Door Position Sensor.
Normal Close.
Common.
Normal Open.
Lock Screw