N2N Vpn Client; Dhcp Server; Dhcp Service - Zycoo CooVox-U80 User Manual

5.3.5 N2N VPN Client
N2N is an open source Layer 2 over Layer 3 VPN application which utilizes a peer‐to‐peer
architecture for network membership and routing.
On CooVox IPPBX system we support N2N VPN client, to configure the N2N VPN client, please
navigate to web menu
Network Settings‐>VPN
configure the client info.
Enable: Tick this checkbox to enable N2N VPN client.
Server Address: N2N server(supernode) IP address.
Port: N2N service port number. This is 82 by default.
Local IP: VPN local IP.
Subnet Mask: Netmask of the VPN network.
Local Port: N2N local service port.
Username/Password:Used for the N2N server to authorize the connection.
5.4 DHCP Server
DHCP(Dynamic Host Configuration Protocol)is a standardized network protocol used on Internet
Protocol (IP) networks for dynamically distributing network configuration parameters, such as IP
addresses for interfaces and services.
With DHCP, computers/IP phones request IP addresses and networking parameters automatically
from CooVox IPPBX WAN/LAN port which saves administrators a lot of time when compared with
having to configure these settings manually.
5.4.1 DHCP Service
Navigate to web menu Network Settings‐>DHCP Server.
Client. Check the radio button of N2N VPN and