Ensure VLAN IPs for VLAN1 and VLAN2 of WAN and LAN interfaces are in several different
network segments.
5.2 Static Routing
Static Routing is a form of routing that occurs when a router uses a manually‐configured routing
entry, rather than information from a dynamic routing protocol to forward traffic.
Navigate to web menu Network Settings‐>Static Routing. Click "New Static Routing" to add a new
routing record to the system.
Destination: Set the IP address of destination host or network address. E.g.222.209.4.1,
192.168.10.0.
Gateway: Set the gateway address.
After thenew record has been manually created you can see it listed here on this page.