1 Package Contents 2 Hardware Installation Thank you for purchasing ZYCOO IP phone system. These are the items The followings are the instructions for setting up ZYCOO CooVox- Included with your IP phone system purchase: U20 IP PBX. Please refer to the illustration and follow the simple steps below to quickly install your IP phone system.
Page 4
0 C~40 C 10%~90%RH Non-condensing Storage 5%~90%RH Non-condensing -40 C~70 C Please keep CooVox-U20 far away from the electromagnetic interference to avoid any damage to the device. Clearness Desktop Installation Please place the IP PBX on a steady platform Caution: Please set 5~10cm gaps around the device for air circulation ...
2.2 Physical Connection 2.3 LED Definitions Indication Function Status Explanation CooVox-U20 Power On Power Status Power Off Blink System works Power Adapter System doesn’t boot System Status System failure PSTN Connected but no data transfer WAN Data Status Blink Data Transfer...
3 Basic System Configuration Default URL address: Default address of WAN port: https://192.168.1.100:9999 Default address of LAN port: https://192.168.10.100:9999 Default Username: admin Step 1. Connect a computer and the CooVox device in the same Default Password: admin network. IP address is usually in the 192.168.1.X range. Step 2.
You can also browse our online FAQ resource at the ZYCOO Web site first to check if it could solve your issue. If you need more support, please contact ZYCOO support team.