Follow M E - Zycoo CooVox-U80 User Manual

Digit Timeout(sec):The maximum interval time between digits when typing extension
number. Defaulted 5 seconds.
Extension for this DISA(Optional):If you want to access DISA by dialing an extension, you can
define an extension number for this DISA.
Select DialPlan:Select a dial plan for this DISA so callers will be able to make outbound
phone calls using the trunks on the IPPBX system.
Notice:
After a new DISA is created, it can be included in the inbound control section as a call destination. But this isnot
recommended as it is not safe because all callers can potentiallyaccess DISA functionality. A better option is to
configure DOD settings (Chapter 3.3.6) for the numbers which you want to be able to access DISA.
4.7 Follow Me
The Follow Me feature allows you to set a list of numbers that you may possibly be contacted on.
Therefore, if someone calls your extension and you are not available then follow me will work
through the list calling each of the numbers in turn until you are contacted or the list is
exhausted.
To configure follow me, navigate to web menu Advanced‐>Follow Me. Click on "New Follow Me"
to configure follow me for an extension.
Extension: Select the extension number which will be configured with follow me.
Ring lasting for _20_
forwarded out. By default,this is 20 seconds.
Follow Me List: The list of numbers to forward the calls to. Each line is written with the
format "number,time", "number" is one of the numbers to forward the calls to, "time"
defines how long to ring this number. They are separated with a comma without space.
Numbers are called in sequence.
seconds:Define how long to ring the extension before the call is