Module Settings; Data Storage - Zycoo CooVox-U80 User Manual

cannot access the Internet. You can choose to manually set the system time by checking "Manual
Time Set" radio button.
There are two ways to manually set a time on the system.
1. Manually input the time and date info and click "Save".
2. Synchronize the IPPBX system time with your PC time by clicking "Sync" button and then click
on "Save" button.
Once "Save" is clicked the time is manually written or synchronized from the PC and will be
stored into the hardware clock chip on the IPPBX motherboard.
8.2 Module Settings
ZYCOO CooVox‐U80 and U100 IPPBX systems require proper module settings to load correct
drivers and configure files to drive the E1 and BRI telephony modules.
Default module settings are with module types FXS/FXO on both telephony module slots. So if
you don't have E1 and BRI modules installed then you don't have to configure module settings.
8.3 Data Storage
Data storage allows you to upload your recording files, log files and voicemail messages to an
external USB storage plugged to the CooVox IPPBX USB interface or upload direct to an FTP server
through the Ethernet.