Fxo - Zycoo CooVox-U80 User Manual

By clicking "Edit" you can modify the trunk settings and by clicking "Delete" you can remove this
trunk from the IPPBXsystem.
3.1.2 FXO
FXO Trunks
On the IPPBX front panel, red LED indicates the RJ11 interface is FXO. You should attach the
telephone wire from your telecom socket to the FXO ports. Once connected you are able to see
the connection status on Operator page "FXO Ports" section.
To be able to make calls on your FXO interface you will first need to create a trunk(s). To create a
trunk you need to navigate to web menu Basic‐>Trunks‐>FXO/GSM Trunks.
Click "New FXO/GSM Trunk" button and you'll see the available port numbers that can be used.
Description: A name for this FXO trunk.
Lines: Available FXO and GSM ports.
Prefix: The prefix number you enter here will be added in front of any number you dial via
this trunk. This feature is seldom required so please leave this field blank.
Call Method: If in this trunk you have more than 1 FXO/GSM ports selected, then this
parameter defines how to use these ports for outbound phone calls.
Busy Detection: Enable busy tone detection
Busy Count: Specify how many busy tones to wait for before hanging up, configurable only if