Modify A Cable For The U8903B Cmrr Test; Figure C-1 8120-1840 Bnc Cable; Figure C-2 Male End Of The Xlr Cable; Figure C-3 Uncover The Soldering Wire - Keysight U8903B Service Manual

C Appendix C

Modify a Cable for the U8903B CMRR test

1 Order the following parts as material:
Table C-1
Part
U8903-61301, male XLR to female XLR, 2 m, Black
8120-1840, BNC male to straight BNC 48-in
2 Cut one end of the 8120-1840 BNC cable shown in Figure C-1.
Figure C-1
3 Locate the male end of the XLR cable, then turn the black sleeve counter-clockwise to
loosen it from the metal body.
Figure C-2
4 Retrieve the sleeve and wire hood to uncover the soldering wire.
Figure C-3
162
Parts to order
8120-1840 BNC cable
Male end of the XLR cable
Uncover the soldering wire
Quantity
1 piece
1 piece
Keysight U8903B Service Guide