Inserting The Flush-Mounted Connection Module - Gira G1 Installation Manual

3.4
Inserting the flush-mounted
connection module
Fasten the flush-mounted
connection module:
Fig. 13
Inserting the flush-mounted connection
module
01
Insert the flush-mounted connection
module into the flush-mounted device
box.
Note
TOP
Mind the TOP marking. The TOP
marking must be upright as shown in
the image.
3 Mounting the device
Fig. 14
Flush-mounted connection module is fixed
02
Tighten two of the supplied suitable
countersunk screws.
The flush-mounted connection module
is fixed.
21