Table of Contents
Advertisement
Switching actuator, 1-gang 16 A with binary input, 3-gang
–
Switching contact indicator for displaying a contact state in the Smart Home
app.
–
Configurable switching inputs that can be parameterised independently.
–
Acquisition and calibration of temperature values via remote sensors (see ac-
cessories) at input 3.
4
Information for electrically skilled persons
DANGER!
Electric shock when live parts are touched.
Electric shocks can be fatal.
Always disconnect device before working on it. For this, switch off all corresponding
circuit breakers, secure against being switched on again and check that there is no
voltage. Cover up adjacent live parts.
4.1
Mounting and electrical connection
DANGER!
When connecting the bus/extensions and mains voltage wires in a shared appliance
box, the bus line may come into contact with the mains voltage.
This endangers the safety of the entire installation. People at remote devices may
also receive an electric shock.
Do not place bus/extensions and mains voltage terminals in a shared connection
compartment. Use an appliance box with a fixed partition wall or separate appliance
boxes.
Connecting and fitting the device
–
Enter or scan the device certificate and add it to the project. A high resolution
camera should be used to scan the QR code.
–
The device certificate should be removed from the device during mounting.
–
Document all passwords and keep them safe.
Mounting in suitable appliance box (recommendation: electronic device box with par-
tition). Observe cable routing and spacing (see figure 3)!
82404332
29.11.2022
6 / 14
Advertisement
Table of Contents
