Fitting And Electrical Connection - Gira 5023 00 Manual

Switching actuator / blind actuator 16 A Standard & Komfort

5.1 Fitting and electrical connection

Fitting the device
In secure operation (preconditions):
– Secure commissioning is activated in the ETS.
– Device certificate entered/scanned or added to the ETS project. A high resolution camera
should be used to scan the QR code.
– Document all passwords and keep them safe.
Observe ambient temperature. Ensure adequate cooling.
￭ Mount device on DIN rail.
￭ In secure operation: The device certificate must be removed from the device and stored
securely.
Connecting the device
￭ Connect bus line with KNX connecting terminal according to their correct polarity.
￭ Attach the cover cap to the KNX connection as protection against hazardous voltages.
￭ Connect load as shown in the connection example. Two adjacent relay outputs form a
Venetian blind output.
The total current capacity of neighbouring outputs is a maximum of 20 A.
Figure 4: Total current capacity of neighbouring outputs
82402612
Figure 3: Device connection (connection example):
23.09.2020
6 / 9