Table of Contents
Advertisement
Switching actuator 2-gang / blind actuator, 1-gang 16 A with binary input, 3-gang
–
Window contact polling and visualisation in the Smart Home app: An open
window leads to the frost protection heating mode after a configured time has
elapsed.
–
Door contact polling and visualisation in the Smart Home app: An open door
leads to the Venetian blind or shutters being raised and locked.
–
Polling of a switch-over between heating/cooling at a heat pump in order to be
able to forward the current operating mode (heating or cooling) to a heating
controller.
–
Switching contact indicator for displaying a contact state in the Smart Home
app.
–
Configurable switching inputs that can be parameterised independently.
–
Acquisition and calibration of temperature values via remote sensors (see ac-
cessories) at input 3.
4
Information for electrically skilled persons
DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
4.1
Mounting and electrical connection
DANGER!
When connecting the bus/extensions and mains voltage wires in a shared appliance
box, the bus line may come into contact with the mains voltage.
This endangers the safety of the entire installation. People at remote devices may
also receive an electric shock.
Do not place bus/extensions and mains voltage terminals in a shared connection
compartment. Use an appliance box with a fixed partition wall or separate appliance
boxes.
Connecting and fitting the device
–
Enter or scan the device certificate and add it to the project. A high resolution
camera should be used to scan the QR code.
–
The device certificate should be removed from the device during mounting.
–
Document all passwords and keep them safe.
Mounting in suitable appliance box (recommendation: electronic device box with par-
tition). Observe cable routing and spacing (see figure 3)!
82404232
29.11.2022
7 / 17
Advertisement
Table of Contents
