Dimming actuator, 4-gang Standard
Continuous manual mode is switched off. Bus operation is switched on.
When switching off manual operation, the outputs, depending on the program-
ming, switch to the active position.
Operating the outputs
■
Press the button ǃ (6) briefly as many times as necessary until the desired
output is selected.
The LED of the selected output A1... (4) flashes.
The LEDs ON|+ (8) and OFF|− (11) indicate the status.
■
Operate output with ON|+ (9) button or OFF|− (10) button.
Short: switch on/off.
Long: dim brighter/darker.
Release: Stop dimming.
The LEDs ON|+ (8) and OFF|− (11) indicate the status.
Short-term manual mode: After running through all of the outputs the device
exits manual mode after another brief actuation.
Switching off all outputs
The device is in continuous manual mode.
■
Press the button ALL OFF (7).
All outputs are shut off.
5
Information for electrically skilled persons
DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
5.1
Mounting and electrical connection
Mounting the device
–
Enter or scan the device certificate and add it to the project. A high resolution
camera should be used to scan the QR code.
–
The device certificate should be removed from the device during mounting.
–
Document all passwords and keep them safe.
Observe ambient temperature. Ensure adequate cooling.
82402732
07.06.2021
7 / 17