Fitting And Electrical Connection - Gira 1039 00 Installation Instructions Manual

4-channel blind/shutter actuator 230 v
Table of Contents

Advertisement

4-channel blind/shutter actuator 230 V~
GIRA
Info
Installation Instructions
Disabling individual outputs
The device is in the permanent manual control mode.
• Press the
key briefly < 1 s several times until
the desired output is selected.
The status LEDs of the selected output A1...A4 are
flashing.
• Press the
and the
least 5 s.
The selected output A1...A4 is disabled.
The status LEDs of the selected output A1...A4 are
flashing fast .
• Activate the bus mode (deactivate the permanent
manual control mode).
A disabled output can be operated in the
i
manual control mode.
When a disabled output is selected in the
manual control mode, the respective sta-
tus LEDs are flashing twice briefly at inter-
vals.
Information for qualified electricians
DANGER
Electric shock in case of accidental contact with live parts. Electric shocks may be fatal.
Before working on the device, cut out the mains supply and cover up live parts in the surroundings.
Risk of irreparable damage if several drives are connected in parallel to one output.
Limit switch contacts can weld together and drives, blinds/shutters and the shutter actuator can be
irreparably damaged.
Use an isolating relay.

Fitting and electrical connection

Fitting the device
Observe the temperature range (Technical data).
Ensure sufficient cooling.
• Fit the device by snap-fastening on a mounting rail
in acc. with DIN EN 60715. The connecting termi-
nals must be at the top.
4-channel blind/shutter actuator 230 V~
key simultaneously for at
Re-enabling the outputs
The device is in the permanent manual control mode.
• Press the
key briefly < 1 s several times until
the desired output is selected.
The status LEDs of the selected output A1...A4 are
flashing twice briefly at intervals
• Press the
and the
least 5 s.
The selected output A1...A4 is enabled.
The LEDs of the selected output are flashing slow-
ly.
• Activate the bus mode (deactivate the permanent
manual control mode).
1/07
key simultaneously for at
Page 4 of 10

Advertisement

Table of Contents
loading

Table of Contents