Tools -> Upload Parameters - Siemens SINAMICS V90 Operating Manual

Offline
Select this menu command and the following reminder will appear:
● If you click
following information will appear:
Click
Section "Project -> Save project (Page 19)".
● If you click
3.3.5.5 Tools -> Upload parameters
Note
This menu command is only available in online mode.
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
, after the parameters are reset to their factory defaults, the
to close the information window. To save the project, please refer to
or , the operation is aborted.
User interface
3.3 Menu bar
25