Siemens SINAMICS V90 Operating Manual page 13

– If you select the second option, you need to select an existing project in the following
Status indicators
In the SINAMICS V-ASSISTANT main window, the current working mode is indicated by the
status indicators at the upper right of the main window:
You can switch the working mode between the two modes. For more information, refer to
Section "Switch menu (Page 22)".
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
directory as the current project and enter the main window:
①
The default location is: xxx/Siemens/V-ASSISTANT/Project.
xxx: SINAMICS V-ASSISTANT setup root directory.
②
Only .prj format is available.
Online
Offline
User interface
3.1 Working modes
13