Siemens SINAMICS V90 Operating Manual page 12

User interface
3.1 Working modes
● Offline mode: SINAMICS V-ASSISTANT does not communicate with any connected drive.
Two options are available for your choice:
– If you select the first option, you must select a drive from the following window:
Select the line supply and firmware version from the drop-down lists respectively. Select
the order number of a drive. Click
drive to the new project and enter the main window; or otherwise, click
cancel.
Note
To obtain the firmware version, you can view r29018 on BOP (Basic Operator Panel). For
more information, refer to SINAMICS V90, SIMOTICS S-1FL6 Operating Instructions.
12
to save the factory settings of the selected
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
to