Siemens SINAMICS V90 Operating Manual page 68

Task navigation
4.3 Commissioning
No. Name
8
9
10
11
12
13
14
68
Type Description
EGEAR1 Level Electronic gear.
A combination of the signals EGEAR1 and
EGEAR2 Level
EGEAR2 can select four electronic gear
ratios.
EGEAR2 : EGEAR1
0 : 0: electronic gear ratios 1
•
0 : 1: electronic gear ratios 2
•
1 : 0: electronic gear ratios 3
•
1 : 1: electronic gear ratios 4
•
TLIM1 Level Torque limit selection.
A combination of TLIM1 and TLIM2 can
TLIM2 Level
select four torque limit sources (one external
torque limit, three internal torque limits).
TLIM2 : TLIM1
0 : 0: internal torque limit 1
•
0 : 1: external torque limit (Analog Input
•
2)
1 : 0: internal torque limit 2
•
1 : 1: internal torque limit 3
•
CWE Level Enable clockwise rotations.
1: Enable clockwise rotation, ramp up
•
0: Disable clockwise rotation, ramp down
•
CCWE Level Enable counter-clockwise rotations.
1: Enable counter-clockwise rotation,
•
ramp down
0: Disable counter-clockwise rotation,
•
ramp up
ZSCLAM Level Zero speed clamps.
P
1 = when the motor speed setpoint is an
•
analog signal and lower than the thresh-
old level (p29075), the motor is clamped.
0 = no action
•
Control mode
PTI IPos
✓ ✓
✓ ✓
✓ ✓
X X
X X
X X
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
S T
X X
X X
✓ X
✓ ✓
✓ ✓
✓ X