Siemens SINAMICS V90 Operating Manual page 73

No.
8
9
10
11
12
13
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003
Name Descriptions
MBR Motor holding brake
1: motor holding brake is closed
•
0: motor holding brake is released
•
Note: MBR is only status signal because the
control and the power supply of the motor hold-
ing brake is realized with separate terminals.
OLL Overload level reached
1: motor has reached the parameterizable
•
output overload level (P_overload_level in %
of rated torque, default: 100%, max: 300%)
0: motor has not reached the overload level
•
WARNIN Warning 1 condition reached
G1
1: parameterizable warning 1 condition has
•
been reached.
0: warning 1 condition has not been
•
reached.
See note below.
WARNIN Warning 2 condition reached
G2
1: parameterizable warning 2 condition has
•
been reached
0: warning 2 condition has not been
•
reached.
See note below
REFOK Referenced
1 = Referenced
•
0 = Not referenced
•
CM_STA Current control mode
1 = The second mode in five compound
•
control modes (PTI/S, IPos/S, PTI/T, IPos/T,
S/T)
0 = The first mode in five compound control
•
modes or four basic modes (PTI, IPos, S, T)
Task navigation
4.3 Commissioning
Control mode
PTI IPos S
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
X ✓ X
✓ ✓ ✓
T
✓
✓
✓
✓
X
✓
73