Status Of Di Signals - Siemens SINAMICS V90 Operating Manual

Task navigation
4.3 Commissioning
Note
• This function is unavailable but can be displayed in offline mode.
• The status of each indicator and analog value are updated every 0.5 s.
• Signal P_TRG in PTI mode is reserved for future use.
• You can change the signal link as you desire. For more information, refer to Section
"Configuring inputs/outputs (Page 52)".
4.3.1.2

Status of DI signals

You can view the name, description, value and status of individual DI signals on the following
panel:
66
SINAMICS V-ASSISTANT Online Help
Operating Manual, 02/2015, A5E32187373-003